Snow Plowing Forum banner
Cancel
Create thread New Forums

2009 Boss 9' Super Duty.

Jump to Latest
1.3K views 25 replies 7 participants last post by  Mark13  
#1 ·
I have a 2009 Boss 9' Super Duty blade with a hand held controller, curb guards, and rubber snow deflector. Very good shape, always washed and stored inside. Used 1 winter and then has mostly been sitting inside since then with seldom use as a back up plow. Currently it's coated in fluid film which is why the paint looks funny in the pictures.

Located in Woodstock, IL.

$3250 obo.

Image

(paint is not all scratched on the moldboard. what looks like scratches and rust is grass clippings and dust stuck in the fluid film from my dad on the loose with the leaf blower)
Image

Image

Image
 
#2 ·
Bump. I'd like to see this gone to a new home where someone will use it, it'll be lucky if I pull it out of storage this season.
 
#6 ·
Mdwstsnow512;1530021 said:
Got truckside?
Click to expand...
I did but sold it to another member on here. I had a truck for this plow to go on but sold the truck and just have the plow and controller left.
 
S
#12 ·
Still have it
 
Save
Like Like
#20 ·
Straight and V wiring harness's are universal. You can run a straight on a v controller but not vis versa
 
Save
Like Like
#21 ·
newhere;1545787 said:
A v-blade plug/controller can run a straight right?

but a straight can not run a v ?
Click to expand...
I normally run the 9.2 V that's in my sig but I can run this blade off all the same stuff. It's plug and play. I even use my V joystick to run the straight blade.
 
#22 ·
So i need to find a mount for any truck or a push beam, any wire harness and a v-controller. I want to take the v off my truck and put it on a tractor. Then this blade can go right onto my truck and use its mount, wire and controller. Is that right?
 
#23 ·
newhere;1545796 said:
So i need to find a mount for any truck or a push beam, any wire harness and a v-controller. I want to take the v off my truck and put it on a tractor. Then this blade can go right onto my truck and use its mount, wire and controller. Is that right?
Click to expand...
This blade comes with a straight blade controller. To make it work on your truck you need a wiring harness and the truckside mount.
 
#24 ·
I want to be able to swap the v back and forth between the truck and tractor so i think i need a v controller in each.

Do you have any truck side mounts for sale? doesnt matter to what kind of truck because im just going to cut it apart to make a tractor mount.
 
#25 ·
newhere;1545808 said:
I want to be able to swap the v back and forth between the truck and tractor so i think i need a v controller in each.

Do you have any truck side mounts for sale? doesnt matter to what kind of truck because im just going to cut it apart to make a tractor mount.
Click to expand...
You'll need a v controller then to be able to swap blades back and forth.

I do not have any truck mounts. Just the blade and a straight blade controller.
 
You have insufficient privileges to reply here.
Snow Plowing Forum
posts
2.8M
members
91K
Since
1999
A forum community dedicated to ice and snow management professionals and enthusiasts. Come join the discussion about equipment, weather, snow management, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Weather Commercial Snow Removal Used Plowing and Truck Equipment Forum Chevy Trucks Networking