1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Xtreme V Jack Stand Problem

Discussion in 'Fisher Engineering Discussion' started by Mid-Ohio Scaper, Feb 13, 2010.

  1. Mid-Ohio Scaper

    Mid-Ohio Scaper Senior Member
    Messages: 610

    This is most likely my fault, but just wondering if anyone has bent the rod that locks the jack stand into place and they're having a hard time getting it to work correctly again.
    Is this common? Is it easy to fix?
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    I've bent the jackstand itself a couple of times, but never the rod. Sorry...
  3. timboy

    timboy Member
    from Ny
    Messages: 69

    Is the flat part of the head gear where the jack leg comes up through bent also.
    If you drag the jack leg or hit something with it it can buckle the leg mounting portion of the head gear causing the rod to bend and the pin holes to be misaligned.
  4. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,039

    I'm not surprised that you can't get it to work the way it use to. Those odd contours are made just right to make it all work. I watched one of the guys at my local dealer try and bend one back awhile back, he ended up breaking it in two and replacing it with a new one.

    If you can't...finangle it and want to replace it, the part number for just that end section is 27478 ($18). All the components can be had if you did more damage then you initially thought.