1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Xterra Plow

Discussion in 'Truck & Equipment Repair' started by mkri23, Dec 31, 2009.

  1. mkri23

    mkri23 Junior Member
    Messages: 2

    I have a 2000 nissan xterra, and was looking to get a plow however they dont make any besides cheap ones that dont even angle, i was wondering if it would maybe be possible to take a plow setup from a wrangler and maybe just have the mount welded to the frame of my truck, is this a possibility? i have found many wrangler plows used that are fairly inexpensive and im looking at something like a Fischer minute mount.
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    i wouldn't see why not. as long as it's a good weld. guy's on here do it all the time.

    i wouldn't go bigger than 7.5 or 8 foot.
  3. mkri23

    mkri23 Junior Member
    Messages: 2

    thanks, i think its only a 6.5 or 7 max so it should be fine, thanks alot