1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

wiring - engin compartment to cab

Discussion in 'Ram Trucks' started by CNY Plow, Sep 14, 2007.

  1. CNY Plow

    CNY Plow Senior Member
    Messages: 145

    I finally got my dealer to tell me what that bolted cover was between the cab and engine compartment. It's for the clutch makes access, and being that i drive an automatic I drilled a hole through it to feed my wiring. I used a 1/2" hole saw (metal) without the pilot bit. I went large because I'm going to feed more wire later and I have an old "boot" that I can cover and plug with. You can use a smaller hole saw but use the pilot bit.

  2. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 9,883

    I just ran mine thought an existing hole in the firewall.
    No drilling, cutting, grommet or boot needed.