1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Winter run down - lots of stuff

Discussion in 'Used Plowing and Truck Equipment Forum' started by KLC99, Dec 6, 2013.

  1. KLC99

    KLC99 Senior Member
    Messages: 160

    Winter run down - lots of stuff
    Selling a ton of stuff as we modify our business plan
    484-880-068four - my name is chip and phone calls are preferred vs texting

    Plow stuff

    - curtis hitch and run sno pro 3000 with new motor, controller, mount for 97-04 f150-250ld $1500

    - boss rt1 7.6 v-plow complete for 92-98 f250, f350, f450(I think) with wiring and controller $1500

    - complete meyer setup with controller off of my '03 dodge ram diesel $1500

    - meyer blades 7.6-8ft $4-500

    - meyer mount and hoop for 03-09 dodge heavy duty $500

    - in the process of rebuilding e60's, e47 meyer pumps. mark III western pumps, and miscellaneous snow equipment but will sell cheap if you want them unmolested.


    - 99 dodge cummins 4x4 quad cab 150k $10,000 firm

    - 94 dodge 2500 with fisher plow rusted out rear truck frame $1500 firm

    - 00 gmc sierra 2500 6.0 4x4 160k $7500 firm -

    - dumper dogg insert new this year for $2500 firm with cab protector and board pockets

    - 78 international loadstar dt466 5+2 10ft dump $3500 firm

    - 78 f350 mason dump needs ring and pinion (pinion shaft broke). Good 400m with np235. good rubber $1800

    - 79 c30 gmc with 8ft all steel dumping stake needs fuel line replaced and misc little stuff $1500 350 4spd

    - 99 f250 superduty 5.4 auto 2wd high miles (285k) runs great $2700

    - 96 f350 4x4 cab and chassis with electric hoist 460 auto needs work - see my other threads $2500 firm with good rubber

    Leaf stuff

    - billly goat 14/18 leaf loader - same dimensions as the 18hp vanguard but powered by a 14hp subaru. We bought it because the price was a few hundred cheaper than the 18hp and the subaru engine would be cheaper to replace. It has the pirahna blade and the serrated impeller. We fitted a tailgate hanger to it from an older unit that shows some age but it's handy to be able to hang on a barn door setup. Great unit $1750 2 years old. 10 inch by 10 foot suction hose and we have an extra height extension for the discharge that's never been installed

    - giant vac towable leaf loader with wisconsin engine. Not sure on the hp but I think it's 19hp and some ridiculous amount of torque. This has a 10 inch intake and 7 inch discharge with a very deep impeller that flows a ton of air. Engine runs perfect and impeller is near perfect. This was privately owned before we bought it and was our spare - only used a couple times. I took pics of the impeller to show the limited use. $1500

    - billy goat 10hp leaf loader. 8 inch by 12 foot vacuum hose with 5-6 inch discharge. New engine a few years back that runs great still but the impellar shows wear and should be replaced for more suction and finer shredding $500 firm

    - 2 giant vac 10-11 hp leaf loaders. 1 has a suspected good engine that needs a pullstart and the other has a better impeller and housing $500 for both

    - 2 8hp giant vac push blowers with good engines that havent been used for a couple years. Both fired over and ran a few seconds on a shot of starting fluid but that's all the time I put into them this year. $500 for both - assume a carb or two and at least one or two tires to make them both fully operational. Will sell 1 for $300 your choice

    - 8hp little wonder blower needs pull start and tires $225 - assume it needs a tuneup too but I wrapped a cord around the recoil and it fired over with 1 pull and a shot of starting fluid

    - 5hp little wonder blower needs pull start - has newer engine $200

    little stuff

    - stihl br600 x3 - $350, 300, and 250 based on age 2006-2010. All work great but the oldest has the top loop broken off on the backboard. Looking to sell 2 and replace them with redmax/husqvarna blowers for leaves. These are great blowers. Light and pretty easy on fuel with lots of power but the stats say redmax moves more air so we are giving them a shot

    - echo 280 bed redefiner with trimmer head also $500. very little use, new carb

    - gravely ocdc that fits 52 and smaller decks $175

    Bigger stuff

    - 2007 scag turf tiger 27/61 velocity deck $3500 under 2000 hours

    - 2001 scag turf tiger 25/61 1/2 year advantage deck with ultracut style baffling $3000 under 2000 hours

    - 2010 hustler super z 31/60 with triple bagger $6500 1300 hours and in good shape. pic shows small tires but it will come with the stock size 24x12x12 with good tread

    - 2012 gravely new style pro stance 22/52 (24hp old rating) with very low hours and in excellent condition $4800

    - 2013 gravely proturn 24/60 $5400 very low hours and in excellent condition

    - 2013 gravely proturn 272 27/72 $8500 under 100 hours and in excellent condition

    - 2004 husqvarna 27/61 ztr hasn't been used in years but engine was good when parked. Jerky hydros were the problem that stopped us from using it. $2000 obo

    - exmark 48 inch belt drive walk behind with seized engine (14hp kawi I think). Has a peerless 5 speed trans so I believe it to be mid90's $250

    - snapper 15/36 hydro walk behind with ergonomic controls and bagger $1000 excellent condition

    - yazoo kees 18/48 ztr $1000 needs ignition and pan gasket replaced

    - encore prowler front mount 60inch. We used the 22hp kohler to re-power a miniskid so it needs a motor or good for parts. Hydros, clutch, etc were all functioning perfectly $600

    - lesco z2 25/60 parts machine. $500 has engine, pumps, and deck but we stole the wheel motors, seat, and tires for other machines over the years. About 1000 hours on the meter

    - scag 3-wheel rider belt drive been sitting for years and needs miscellaneous parts and a tire or two $250 2500 hours on the meter 18hp kohler magnum

    pics to follow as time permits


    unnamed (1).jpg

    unnamed (11).jpg

    unnamed (10).jpg

    unnamed (13).jpg
  2. KLC99

    KLC99 Senior Member
    Messages: 160

  3. KLC99

    KLC99 Senior Member
    Messages: 160

    99 superduty - zero rust on bed - cheap truck that runs like new

    unnamed (63).jpg

    unnamed (61).jpg

    unnamed (60).jpg

    unnamed (58).jpg
  4. KLC99

    KLC99 Senior Member
    Messages: 160

    96 $2500 ($4000 firm package price with hiniker)

    unnamed (54).jpg

    unnamed (55).jpg

    unnamed (56).jpg
  5. KLC99

    KLC99 Senior Member
    Messages: 160

    Cummins - almost too pretty to sell

    unnamed (43).jpg

    unnamed (44).jpg

    unnamed (45).jpg

    unnamed (46).jpg
  6. KLC99

    KLC99 Senior Member
    Messages: 160

  7. KLC99

    KLC99 Senior Member
    Messages: 160

  8. KLC99

    KLC99 Senior Member
    Messages: 160

  9. MatthewG

    MatthewG PlowSite.com Addict
    Messages: 1,400

  10. Oxmow

    Oxmow Senior Member
    Messages: 129

    Are the western plow pumps electric operated or cable?
  11. KLC99

    KLC99 Senior Member
    Messages: 160

    The western pumps are cable controlled. I can convert them to solenoid activated but the cables work well and are easier to install. One is standard duty and two are the heavier models with bigger motors.
  12. KLC99

    KLC99 Senior Member
    Messages: 160

    I'll grab some pics for you. Scags are pretty deep in the garage but the hustler is out and ready for leaves if the snow ever melts
  13. KLC99

    KLC99 Senior Member
    Messages: 160

  14. cbeard

    cbeard Member
    Messages: 95

    Any pics of the Meyer blades?
  15. schwerhaiv

    schwerhaiv Junior Member
    Messages: 20

    set up for 2001 Dodge Ram 1500 Sport

    Would you take $1100 for the complete meyer setup that would fit my truck as identified above?
  16. KLC99

    KLC99 Senior Member
    Messages: 160

    Sorry Joe,
    That setup wouldn't fit on your '01. You need a setup from a '94-'02 - there are a lot of them out there though. Tough to find one for $1100 but keep an eye on craigslist and something might pop up
  17. schwerhaiv

    schwerhaiv Junior Member
    Messages: 20

    I would really like a unimount installed for about 1500-1700, which I think is fair. I understand there is one in erie that I could have installed for about 1800. It's just for my driveway so not really wanting to buy top quality.
  18. KLC99

    KLC99 Senior Member
    Messages: 160

    1500-1700 is not unreasonable for a used setup. Just make sure you get one with the correct mounting bracket for your truck. To buy the bracket new is between $500 and $750 depending on brand...
  19. schwerhaiv

    schwerhaiv Junior Member
    Messages: 20


    Thank you. If you run across one soon, please just send it along. Actually thinking of even buying of of these 2k older dodge trucks with plow just to get the plow.
  20. KLC99

    KLC99 Senior Member
    Messages: 160

    That would be the cheapest way to do it - then you have spare parts or a truck to sell