1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Wing Reference bolt on solid

Discussion in 'Western Plows Discussion' started by Antlerart06, Mar 14, 2015.

  1. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    If you are having problem with the wings bending and falling off.
    Use this as a reference

    I use a 3/4 die to cut threads on the pins that slide in the plow.
    Then used lock nuts.

    My 03 pro plus 8.6 plow I did same to it at least 10 years + and never had a problem since bending them .

    Doing this cuts the rattle noise down




  2. peteo1

    peteo1 PlowSite.com Addict
    Messages: 1,660

    I'd like to do this with my Fisher wings but I was concerned it might make them a little too rigid and bend the plow rib or spring mount
  3. Antlerart06

    Antlerart06 PlowSite Veteran
    Messages: 3,437

    That don't know on a MVP

    I already had one wing before I bolted them on solid bent pins and came off during a storm