[hosenfeffer]

Which connector u guys using for 2 wire connector on Vplow? Help. On my cell phone. Big fingers small screen.

 

[bllm87]

I was thinking about using an Anderson connector as well. I actually had made a post this past week I believe, asking for input on it. One person pointed out that The Anderson Connectors are not water/weatherproof. I'm sure you COULD make them water/weatherproof, but another person said that they use a Philips style plug, like these:

Female: https://www.etrailer.com/Wiring/Pol...BdUA_BPvlOfd6lOSIEcnc4FllVtOwaaMaAvEUEALw_wcB

Male: https://www.etrailer.com/Wiring/Pollak/PK12801.html

 

[cwren2472]

That Philips connector will work excellent, but i've had numerous customers use the Anderson connectors. if you simply load up the rear of the plug with dielectric grease, they will be fine. They are mounted on virtually every tow truck on the road who use them daily.

 

[jonniesmooth]

I have an Anderson connector on my Boss plow, for about 15 years now, no issues with it.

 

[Ray]

Here is the Anderson plug that Boss is using for the drag pro
https://powerwerx.com/anderson-sb-connectors-sb175-175amp
https://powerwerx.com/anderson-36036p1-sb175-environmental-boot-source
https://powerwerx.com/anderson-36037p1-sb175-environmental-boot-load

 

[dieselss]

About 4 or 5 years on my Anderson's, never covered and always out in elements, no green so far.
Fyi they sell waterproof ends for them, and weather proof caps

 

[JMHConstruction]

I have 3 or 4 years on my Anderson plugs. purchased them at NAPA for MUCH more than they are online but if you need them now they're worth the extra cash

Never had an issue. I filled the back with silicone caulk (just don't let it get on the connections). The off season I fill it with dielectric grease and clean it out at the beginning of the season, but for $12 I may just get an extra end to seal it up

 

[cwren2472]

The off season I fill it with dielectric grease and clean it out at the beginning of the season, but for $12 I may just get an extra end to seal it up

As @dieselss said, they have rubber covers you can put over the end. They are only a few bucks

The other end wouldn't fit on unless you put the contacts in there anyway

 

[JMHConstruction]

As @dieselss said, they have rubber covers you can put over the end. They are only a few bucks

The other end wouldn't fit on unless you put the contacts in there anyway

Good point.

I'll look for those rubber ends

 

[JMHConstruction]

Good point.

I'll look for those rubber ends

https://powerwerx.com/dust-cover-sb...GqiU6-gkYZnSXMaMOMknW-wnzSKD0YpoaAoYrEALw_wcB
Thumbs Up

 

[extremepusher]

Ebling uses Anderson plugs on all there truck backblade plows. for 10 yrs or so...

 

[Mark Oomkes]

Andersen's all the way.

 

[TJS]

Phillips.