1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

whats wrong with this picture

Discussion in 'Fisher Engineering Discussion' started by g-landscaping, Jan 25, 2008.

  1. g-landscaping

    g-landscaping Member
    Messages: 77


    is this too much weight for this truck

  2. Clapper&Company

    Clapper&Company PlowSite Veteran
    from NE OHIO
    Messages: 4,413

    This was already on here about 2 weeks ago !!!!!

    Its not as bad as it looks, the ground it sloped also
  3. SnoFarmer

    SnoFarmer PlowSite Fanatic
    from N,E. MN
    Messages: 9,883

    Not really look at the pole right behind the truck..

    If we "assume" it is straight up and down

    The pole in the back round and the horizon line are not indicators of a slope or flat land.

    It is as bad as it looks the front tire is stuffed in the wheel well and the back is ready to come up off of the ground.

    It needs the bars turned up and some timbrens would not hurt ether.
    Of course it also needs #500-#700lbs of weight in the back
  4. iceyman

    iceyman 2000 Club Member
    Messages: 2,926

    theres no snow.....:rolleyes:
  5. Duncan90si

    Duncan90si Senior Member
    Messages: 602

    what wrong?

    1. Someone doesn't know how to install Timbrens or crank the TBs.

    2. There is no snow on the ground.

    3. That spoiler on the roof is not my style.
  6. bersh

    bersh Senior Member
    Messages: 169

    Considering that is a 3/4 ton truck, no, that's not too much weight. As others have mentioned, it needs a couple turns on the torsion bars, and it needs about 500 lbs. or so placed behind the rear wheels. Those 2500 already have low front ends, so this isn't as bad as it looks.
  7. Fordistough

    Fordistough Senior Member
    from USA
    Messages: 394

    That's why you buy a vehicle with a solid front axle.
  8. dakotasrock

    dakotasrock Senior Member
    from MN
    Messages: 260

    whats the problem? She aint a dodge. :nono:
  9. SteveJ

    SteveJ Senior Member
    Messages: 141


    That looks like it's gonna go splablamblat. I know, thers no keg of beer in the back!
  10. mayhem

    mayhem PlowSite.com Addict
    from Peru MA
    Messages: 1,016

    It also looks like the right rear tire is on a slightly bump and the left rear is in a slight dip.

    I'd like to see this truck in the middle of a level parking lot with the plow raised and another photo with it down and in full float.

    I have basically the same exact truck in another color and while my front end is lower than I'd like its not that low when I'm on level ground.
  11. Ladder15

    Ladder15 Junior Member
    Messages: 26

    No Ballast
  12. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Yep no ballast is a big issue. Fisher Website I think wants 600 pounds. The second thing no one noticed is that The rear wheel on other side is probably up on that curb . Notice truck i sparked sideways to the curb. And is that a half ton with 7,6 on it? Hell the 2500 sits low with aplow on it.
  13. mayhem

    mayhem PlowSite.com Addict
    from Peru MA
    Messages: 1,016

    ^^ Its a 2500 with an 8' on it.

    I mentioned the rear tire being up higher, someone else did early on too.
  14. SteveJ

    SteveJ Senior Member
    Messages: 141

    I don't think thats an 8 ftr. Look at the ribs and it only has one trip spring on the left, typical 7'6"er. Looks like a MM1 LD. I agree with the curb though. And a nice sander would be sweet in the back of that, tailgator.:cool:
  15. nickv13412

    nickv13412 Senior Member
    Messages: 621

    yup its a 7'-6", not an LD though, LD's only have 2 trip springs, thats definetly and RD
  16. mayhem

    mayhem PlowSite.com Addict
    from Peru MA
    Messages: 1,016

    DOH! You're right. In that case that truck has no business with the front end being that low. He's either up on a curb, purposely lowered the front suspension or has a broken set of springs.
  17. SteveJ

    SteveJ Senior Member
    Messages: 141

    Springs? :dizzy::dizzy::dizzy::rolleyes:
  18. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,194

    Where did you get the picture of my truck!:D
  19. tkrepairs

    tkrepairs Senior Member
    from maine
    Messages: 186

    2500 non HD, no ballast, and if you look at the horizon, yes the camera does look angled. tought to tell without anymore information if there's a problem or not. but to me, there's no problem. its not my truck lol.
  20. Fordistough

    Fordistough Senior Member
    from USA
    Messages: 394

    Since when did Chevy start putting springs back on their trucks?