1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Whats the best way to change all the Fluid in Meyer plow

Discussion in 'Commercial Snow Removal' started by Fat Bald Guy, Dec 13, 2009.

  1. Fat Bald Guy

    Fat Bald Guy Junior Member
    Messages: 10

    Think I have had water infiltration into my plow fluid. They changed the fluid last year in the main body but not the lines to the angle rams.. I think the residual water is hangin out there. Whats the easiest way to flush out these lines and refill without causing an airlock..

    thanks guys.

  2. thesnowman269

    thesnowman269 Senior Member
    Messages: 965

  3. Colombocustom

    Colombocustom Junior Member
    Messages: 12

    Take plowoff of truck (usually with a sledge hammer and a torch)
    Throw plow in the nearest dumpster
    Install new Western Pro Plus asap!
  4. TLB

    TLB Senior Member
    Messages: 275

  5. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    Run some Meyer Hydra-flush through it to help clean it out
  6. thesnowman269

    thesnowman269 Senior Member
    Messages: 965

    youtube kicks a$$
  7. MahonLawnCare

    MahonLawnCare Senior Member
    from Ohio
    Messages: 852

    those videos rule