1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

What is the big deal with...

Discussion in 'Truck & Equipment Repair' started by Grn Mtn, Oct 12, 2006.

  1. Grn Mtn

    Grn Mtn PlowSite.com Addict
    Messages: 1,644

    I just don't get it what is the big deal with drilling a hole in the mold board? That seems to be the big deal with the prowings, personally I wouldn't want to put all the side pressure on the ribs, that is not what they are intended to do. The hole in the mold board is like a molly bolt, holds back the pressure with the whole plow, not just a rib.

    any thoughts on this?
  2. hickslawns

    hickslawns Senior Member
    Messages: 627

    I agree with you on this one. The only exception might be on a poly plow. I wouldn't try that myself.
  3. NoFearDeere

    NoFearDeere PlowSite.com Addict
    Messages: 1,724

    Thats exactly why I bought the Boss wings instead of pro-wings
  4. Grn Mtn

    Grn Mtn PlowSite.com Addict
    Messages: 1,644

    Because you have a polycarbonate mold board, or what exactly