1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

What do I have?

Discussion in 'Meyer / Diamond Products Discussion' started by fedspunisher, Jul 23, 2008.

  1. fedspunisher

    fedspunisher Member
    from Iowa
    Messages: 89

    My 83 Chevy has a mount under it with the round tubes for the pump mount bracket. I bought a 74 Chevy that had a 7.5 Meyers plow with a e47 pump. I pulled all the truck mount off but the pump/motor bracket on this one is just a vertical plate with 3 holes on each side. I measured the plow mount holes and they are the same distances apart so im thinking the plow will mount just fine. For the pump mount im thinking of just buying so round tubing and welding that to the pump bracket i have. But if i can figure out exactly what i have and what i need maybe i can sell one and buy what i need instead of fabing. If someone has the lift frame with the round tubing could you get me the dimensions of the tubing so i can see what it will run me to fab one up compared to finding one used.


    Last edited: Jul 23, 2008