1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western Unimount pump will not run HELP

Discussion in 'Truck & Equipment Repair' started by RefinedPS, Jan 5, 2012.

  1. RefinedPS

    RefinedPS Senior Member
    Messages: 131

    My brother-in-law purchased a Unimount Pro Plow, and I picked it up with my truck. It worked just fine on my truck, but now it doesn't work on his. The pump clicks, but doesn't run. Tried the seloniod, but still doesn't work. Any ideas? Possibily a bad ground?
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    bad ground is very possible. hook jumper cables right to the plow motor power and ground then see if the motor runs. if it does, hook just the ground to the motor and run the control. if it runs with the controller your ground is bad.
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,400

    test light the plow solenoind. pwr coming in,,,when you raise left right,,,pwr coming out. as no lead said could also be a gnd.
  4. RefinedPS

    RefinedPS Senior Member
    Messages: 131

    Turned out to be a ground wire. Got it going today. Thanks for the help. :salute: