[GONZO911]

I have a Western Striker electric spreader that is finally working correctly. I would like to hook up some strobes and work lights and use the controller to turn on and off. If you use a fuse block to protect each accessory, is the module supplying the power or ground leg of circuit?

 

[quigleysiding]

Here you go

Wiring Accessory taps on Western Striker

So for anyone who doesn't want to buy the standard western accessories here is a wiring description. There are 4 ends located in the box at the rear of the salter. White - Strobe Grey - Lights Color 3 - Vibrate Color 4 - Prewet Using a standard 4 or 5 pin auto relay. 85 - Negative...

www.plowsite.com

You might want to read this one too .

Fisher Steelcaster accessory lights staying on

But you have red at the top and black at the bottom in your photo. If you are just using an empty holder as a junction block, that's fine but wanted to confirm that. Junction block and Lighting harness with relay and fuse from Fisher.

www.plowsite.com

 

[cwren2472]

is the module supplying the power or ground leg of circuit?

Ground

 

[Kvston]

Everything through the relays. Nothing through the module.

 

[GONZO911]

Thank you for all the replies. It confirmed what I was thinking. Bright lights and strobes on the way!