1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Western hydro/elec pump on Fisher frame

Discussion in 'Commercial Snow Removal' started by ksland, Nov 11, 2003.

  1. ksland

    ksland Senior Member
    from ma
    Messages: 419

  2. Brian Simmons

    Brian Simmons PlowSite.com - Sponsor
    Messages: 196

    Depending on which headgear you will be using. If the headgear is a RD/HD it will not fit as the headgear will be to tall. Fisher used a 6" version and a 10" version of the lift cylinder so we had 2 different headgears. Western only had the 6" that fit there headgears. Also western used 3/4" pins to attach the unit to the headgear and the gussets for the headgear and lift arm on the fisher will be 1". You could buy a new base lug P/N5824 that will bolt in place of the westerns to make it attach to the headgear on the bottom. You will also have to either drill out the hole to 1" or weld some plates with 3/4" holes to the gussets on the fisher liftarm. But first you need to make sure that the headgear you have is for the 6" Hyd. unit.