1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

WANTED: S-10 plow frame

Discussion in 'Used Plowing and Truck Equipment Forum' started by A Goodfella, Aug 10, 2006.

  1. A Goodfella

    A Goodfella Junior Member
    Messages: 0

    Last edited: Aug 10, 2006
  2. ibelee

    ibelee Senior Member
    Messages: 188

    S-10 Plow Frame

    Might have one for you.
    What type set up? Classic, Custom?
    Plow size?
    Do you need just the Truck Side Mount or the SAF and Lift Frame also?
  3. A Goodfella

    A Goodfella Junior Member
    Messages: 0

    Thanks for the response, I will answer your questions the best I can.

    The plow size is 6.5' I measured the ears for the clevis pins on the plow and they measure 19" from outside to outside. The ears themselves are 1.5" wide, making the inside measurement from ear to ear 16".

    The pump is a Meyers E47

    I need the plow mount and the lift frame for the truck.

    To give you a better backround on all of this, I am pulling this set up off of a 69 cj5. I am mounting it on a 89 Chevy S-10 because I would like to have a few creature comforts like heat and fuel injection. :) The set-up doesn't have to be pretty it just has to work as the vehicle will never leave my home.

    I hope all this helps and again, Thankyou for your response.