Unimount truck side mount setting

Discussion in 'Western Plows Discussion' started by oppi2010, Feb 2, 2011.

  1. oppi2010

    oppi2010 Junior Member
    Messages: 23

    I have a 2000 ford f 250 and a 9foot unimount and the mount looks realy low its set 11 inch off the ground when the plow is not on
     
  2. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    9 to 11 inches to the center of the lower pin hole is the recommendation from western.
     
  3. OP
    OP
    oppi2010

    oppi2010 Junior Member
    Messages: 23

    thats with the plow off right
     
  4. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    No..That with the plow on......
     
  5. mishnick

    mishnick 2000 Club Member
    Messages: 2,418

    Regardless of what the manual says the best options will result in the A frame being parallel with the ground when the plow is down. The manual gives tables and options with this as the end result. Over time suspentions get tired and sag so sometimes you have to change the bolt options to maintain optimal A frame angle.