1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Unimount drain plug stripped

Discussion in 'Western Plows Discussion' started by amscontr, Dec 10, 2008.

  1. amscontr

    amscontr Junior Member
    Messages: 14

    I was going to change the oil in my pump and the last person that tightened the plug up must of been Hercules. I tried to everything except drilling and re-tapping. Could a person pull the motor and a couple lines and drain it that way or run the motor and pump the oil out?
  2. wild bill

    wild bill PlowSite.com Addict
    Messages: 1,239

    :realmad:just pull the motor ,use a suction gun pull the old oil out, clean the filter ,disconnect hoses jack the plow up ,manual angle the blade to force the oil out hose into drain pan repete on both sides till most oil is out .reconnect fill with go-go juice ,and bleed air out and go .
  3. panhead9

    panhead9 Member
    from NY
    Messages: 31

    +1 :salute::salute: