1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Uni mount troubles

Discussion in 'Western Plows Discussion' started by 90plow, Nov 15, 2011.

  1. 90plow

    90plow Senior Member
    Messages: 739

    Truck and plow were working fine then the plow just stopped and the solenoid is clicking loudly. There is power both in and out of the solenoid when buttons on controller are pushed and there is also power at the motor when the button is pushed. Checked the ground on the motor also good. Is it the motor?
  2. Tony350

    Tony350 Senior Member
    Messages: 546

    If the motor doesn't spin with power at the motor I would say it is shot. Unless your pump is so messed up that it won't spin, I would think it is the motor.
  3. 90plow

    90plow Senior Member
    Messages: 739

    I think so too i pulled the motor and just let it sit out of the housing and stillmnomspin