1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Uni mount seems slow when raised

Discussion in 'Western Plows Discussion' started by PDQ Pete, Feb 11, 2010.

  1. PDQ Pete

    PDQ Pete Senior Member
    Messages: 139

    I was out plowing yesterday and the plow was working great. After a couple of hours of plowing I went to raise it and it came up real slow jumped out to look and the face of the plow was covered with about 1-2 inches of ice and snow. I cleaned the plow off but it still seems slower when you raise it now. Angles left to right nice. Fluid and filter are clean. Thanks Pete
  2. jb1390

    jb1390 Senior Member
    Messages: 710

    Clean your connections to the motor, solenoid, and ground. Low voltage to the motor will cause slow movement upward but not left to right because lifing the plow takes a lot more power than angling with no load on the blade.