1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

uni mount leak

Discussion in 'Western Plows Discussion' started by The mayor, Oct 26, 2007.

  1. The mayor

    The mayor Senior Member
    Messages: 272

    Ok, my old unimount is starting to leak from a rusty weld on one of the angle rams. I bought a new one but I thought I should ask. besides swaping in a new one is there anything I should do to get the air out of the system or something I should watch out for.
  2. Garagekeeper

    Garagekeeper Senior Member
    Messages: 459

    Nope just fill the power unit and angle the plow back and forth with it still on the ground and you will be just fine. Check and top off your fluid afterwards and your done.
    :rolleyes: John...
  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    If you fill the cylinder and hose with fluid before you reconnect the hose, it'll make it easier and quicker to get the air out..
  4. The mayor

    The mayor Senior Member
    Messages: 272

    Thanks all for the help. It seemed too easy, I was sure more would have to be done.