1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Under Hood Hydrolics Setup/Jeep

Discussion in 'Commercial Snow Removal' started by tvpierce, Oct 4, 2003.

  1. tvpierce

    tvpierce Senior Member
    from Maine
    Messages: 209

    I have a newly acquired ’85 Jeep CJ-7, and I have a Fisher conventional plow setup from another CJ. I have all the parts needed to install the plow on the new jeep except the mounting bracket for the hydraulic pump. (The CJ it came out of had a Chevy engine swapped in)
    Does anyone have a photo of a Fisher plow pump installed on a Jeep 258 ci I-6 (4.2 litre)?

    Thanks in advance.

    Jeff Pierce
    Last edited: Oct 4, 2003
  2. sonjaab

    sonjaab PlowSite.com Addict
    Messages: 1,425

    TV.......My bud has a 93 Chevy pu with a hydralic (spl)
    Fisher set up on it. The plow shop made up/had a
    bracket that mounts next to the PS pump and
    added a double pulley to the PS pump to run it.

    Works ok... but tight to the left fender well liner.
    They just massaged the fender liner with a BFH
    tho. ! BIG F*****G Hammer !

    Not sure if it was a homemade bracket or if it
    was a off the shelf piece................geo