1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Ultramount install question

Discussion in 'Truck & Equipment Repair' started by mrplowpa, Jan 10, 2016.

  1. mrplowpa

    mrplowpa Junior Member
    from pa
    Messages: 19

    Ok, this is probably a stupid question...

    But I'm finishing up the ultra mount install on my f350 and it has the bolts with the welded arm on them so you can reach down inside the frame from the front... So how do I break that arm off? I tried torquing the heck out of the bolt with my impact gun to no avail.... What am I missing here?
  2. cubicinches

    cubicinches PlowSite.com Addict
    Messages: 1,415

    Use a cutoff wheel, air saw, torch, etc. to cut off whatever portion sticks out of the frame rail, after you've tightened the nut. You just leave the rest.
  3. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 12,174

    Or bend them over into a "U" shape and leave them in the frame channel.
  4. cubicinches

    cubicinches PlowSite.com Addict
    Messages: 1,415

    You're obviously much stronger than I... :D wesport