1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Truck-Lite / Saber light Conversion

Discussion in 'Meyer / Diamond Products Discussion' started by Nascar24, Nov 28, 2008.

  1. Nascar24

    Nascar24 Senior Member
    Messages: 645

    Hi All
    Ok, I have finally found some time to do the conversions .

    So here's my wiring project, can anyone give me a down and dirty , connect this color to that color directions to make the conversion.

    Nite Saber plugs are as follows:
    Red-High Beam
    White -Low Beam
    Green-Turn signal
    Yellow-Parking Lamps
    Black -Ground

    This is where I'm stuck

    On the truck-lite lights I could not find the diagram so here's some pictures of the wires and lights:


  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You already know the color designations for the Night Sabers so all you need are the ones for the Trucklites. And they are as follows...

    Red - High Beam
    Green - Low Beam
    Yellow - Turn signal
    Black - Parking Lamps
    White - Ground
  3. Nascar24

    Nascar24 Senior Member
    Messages: 645


  4. Nascar24

    Nascar24 Senior Member
    Messages: 645


    Well four sets of Truck Lites converted and one set of Grote A/M plow lights converted, I think the Grotes were easier. Well I should be good for this year, and still have five or six more sets of wiring for next year.

    Thanks to for all the input I appreciate the help.