1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

trip springs

Discussion in 'Western Plows Discussion' started by snow man 0311, Feb 21, 2010.

  1. snow man 0311

    snow man 0311 Member
    Messages: 66

    I have a few years old western uni-mount 8.6 , how tight should the trip springs be ??????
  2. ZamboniHDB

    ZamboniHDB Senior Member
    Messages: 338

    You should be able to slip a sheet of paper between the second and third coils at the top of the spring.

    Just my .02¢
  3. twinman326

    twinman326 PlowSite.com Addict
    Messages: 1,683

    Zamboni is correct..

    Make sure both nuts (top and bottom) are loose(might have to use a little heat), as your tightening the top nut down, using a piece of paper (printer paper) when you can slip between the second and third curl, tighten up the bottom nut......