1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Toggle Switch to Touchpad

Discussion in 'Meyer / Diamond Products Discussion' started by loc, Feb 3, 2011.

  1. loc

    loc Junior Member
    Messages: 25

    I am currently running a older Meyer E47 with the 2 toggle switch setup. I was wondering if a can switch it over to a touchpad controller. And if so is there any write ups on how to do this.

  2. jmassi

    jmassi Senior Member
    Messages: 157

    Sure, you'll have to replace the wiring harness also. When you do, just make sure the orange wire on the harness goes to neg on the batt.
  3. no lead

    no lead PlowSite.com Addict
    Messages: 1,308

    i would stick with the switches from a reliability standpoint.
  4. fordsuvparts

    fordsuvparts Senior Member
    Messages: 135

  5. maverjohn

    maverjohn Senior Member
    Messages: 902

    How about a joystick, when I ran a meyers lot pro with a e60 pump I mounted the joystick to my stick shift and it worked out great, I could shift the truck and move the plow were I needed it all with one hand. JMO