1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Thinking about taking my 8' Fisher HD blade off, and putting an X blade on

Discussion in 'Commercial Snow Removal' started by Bostonyj7, Mar 2, 2015.

  1. Bostonyj7

    Bostonyj7 Senior Member
    Messages: 183

    Wondering if this is a good idea, or even possible
  2. SnowFakers

    SnowFakers Senior Member
    from CT
    Messages: 944

    They will mount the same, both straight blades. Don't see why not
  3. JTVLandscaping

    JTVLandscaping Senior Member
    Messages: 862

    My old truck has a 7.5' Fisher and I was thinking about putting a 9' on it, but I was gonna use a Meyers blade because it'll weigh less. I only run the truck for small storms and cleanup because it has the spreader.
  4. mercer_me

    mercer_me PlowSite Fanatic
    Messages: 6,371

    I had my 7.5' SD on the same truck I put my 8' HD on. I believe any Fisher straight blade will work as long as you have the same amount of plugs.