1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

TGS 03 Issues

Discussion in 'SnowDogg Snow Plows' started by GMCHD plower, Dec 9, 2015.

  1. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,831

    Spreader turns on and runs fine, but as soon as I turn on the vibrator it will run for a few seconds (the display will "shutter" between the number and a U) then it will stop and show an "L" code. Any ideas? I cleaned my connections at both ends (battery and back of the truck). Checked my connections to the controller, etc. I cant find any shorts in the harness.

    WALKERS PlowSite.com Addict
    Messages: 1,138

    Rust inside your receiver hitch??? Maybe
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,395

    Can you just hotwire the vibrator to see if it works?
    I had a few that would come on, but slowly died if left on.
  4. GMCHD plower

    GMCHD plower PlowSite.com Addict
    Messages: 1,831

    Thats for the ideas fellas, after checking everything I could find and cleaning all the connections I ended up taking the positive lead from the sander harness off the battery post, and put it on a different positive post and all works as it should now.