[Jakedaawg]

So, hit a hidden stump. FML.

Something is clearly kitty-wompous. Thinking its bent at the head of the A-frame.

I am going to tear this down and see if its repairable or replaceable.

I did not assemble this plow so, is there an order of operations that will make getting the A frame out easier?

I am pretty confident in my skills and have repaired many many plows over the years but I figured I'd post this just in case there are some pro tips that may not be readily apparent.

Seems like I am usually repairing western and meyer stuff, not bent up boss plows very often.

Thanks reading guys...

 

[cwren2472]

#1, Take off the springs.
#2, Remove the pins.

Unless I'm misunderstanding your question.

 

[EWSplow]

If you're careful and can block stuff up a bit,you won't even have to remove any hydraulic hoses.