1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Taking hopper out

Discussion in 'SnowEx Products' started by ajslands, Oct 11, 2010.

  1. ajslands

    ajslands 2000 Club Member
    Messages: 2,033

    Just wondering if I would be able to take the hopper out of my pivot pro 1075? I would like to wore brush all of the rust off o it and repaint it, but the wire brush is rather bulky so I can't get into the tight spots that I need to.


  2. SnowEx Products

    SnowEx Products Sponsor
    Messages: 118

    Yes, you can remove the hopper. Here’s how to do it:
    1. Remove the throat clamp.
    2. Remove the two bolts that hold the hopper to the frame.
    3. Remove the hopper.

    I hope this helps. If you’d like some help walking through this, please give our customer service department a call at 1-800-SALTERS.