1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Switching Moldboards

Discussion in 'Meyer / Diamond Products Discussion' started by hcr400ex, Dec 3, 2006.

  1. hcr400ex

    hcr400ex Junior Member
    Messages: 14

    My truck came with a 9' MD2 setup, but most of my driveways are too tight for this plow. I aquired an older 8' blade with a-frame and all, but am not sure they are ment to be switched out. There is like a piece of bar that the moldboard pivots on off the A- frame, but I can not get this out of either plow. I tried heating them up and takeing an air chisel but they do not move.
    Is it even possible to switch moldboards and a- frames or no?