1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Swapping mm2 from tundra to chevy

Discussion in 'Fisher Engineering Discussion' started by maineplow, May 9, 2016.

  1. maineplow

    maineplow Junior Member
    Messages: 11

    Hello I am changing trucks from a 2013 tundra to a 2014 Silverado 1500 and I was wondering besides push plates what would I need to acquire to make the swap for my mm2 HD plow
  2. cwren2472

    cwren2472 Member
    Messages: 89

    You'll also need at least a new headlight adapter, and possibly a new module.

    If you have the Projector style lights with the LED day time running light strip below them, you can use your module but will need a 52101 headlight adapter.

    If you have either the Projector style lights without the LED DRL, or the dual halogen HB3/H11 lights, you'll need a 29760 module and a 69818 headlight adapter
  3. MXZ1983

    MXZ1983 Senior Member
    Messages: 246

    LED strip is 16 MY only. So he should need the items posted in the second list.
  4. maineplow

    maineplow Junior Member
    Messages: 11

    thanks guys, i ended up getting a 2016 chevy 1500 with the led drl strip so near as i can tell i need new plates and the 52101 headlamp harness.does that sound right?
  5. BoondockerEquip

    BoondockerEquip Junior Member
    Messages: 12

    Yes, you need the 7182 frame mounts, 52101 light kit and make sure you are using a green labeled 29070 Isolation Module- not a 29760 Blue labeled isolation module. If you run a 52101 light kit with a 29760 module, your truck lights will have issues.