1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Swapping mm2 from 01 f350 to 06 f250?

Discussion in 'Fisher Engineering Discussion' started by champlainl, Jul 17, 2016.

  1. champlainl

    champlainl Member
    Messages: 65

    Is it possible? Wanna use my truckside mounts and wiring. My blade is 8 ft straight blade commercial. Thanks
  2. 1olddogtwo

    1olddogtwo PlowSite Fanatic
    Messages: 12,174

    Mount NO

    Wiring yes.
  3. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 457

    Fisher eMatch is your friend, check their site and input your trucks and you'll see the differences.

    Agree the mount is no for sure.

    On wiring:
    '01 is likely HB5 (unless square glass sealed beam lens = 2B)
    '06 is likely H13 (same, 2B is an option but fairly rare, stripped down work trucks mostly)

    So unless both are 2B, you'd need to change the headlight harness but everything else would work.
  4. champlainl

    champlainl Member
    Messages: 65

    ok thanks, no sealed beams on '01 or '06, both are xlts,will try fisher site