1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Stuck on angle left

Discussion in 'Blizzard Plows Discussion' started by snowandgo, Feb 16, 2009.

  1. snowandgo

    snowandgo Senior Member
    Messages: 143

    2001 or so 810. Wants to angle left all the time. Plow will angle left, then when it is all the way left, the control you want (wing or up) will work. Won't angle right at all. Replaced the angle left valve thinking it was stuck or had a bad oring. But it didn't help.

    Hook truck up to a different plow and it works fine, so it's not truckside.

    Thanks in advance.
  2. beam

    beam Senior Member
    from pa
    Messages: 314

    Check s3 and s4 and relief valves for junk and o-rings!!!!
    Last edited: Feb 16, 2009
  3. snowandgo

    snowandgo Senior Member
    Messages: 143

    Thanks, beam. s3 had wire from the screen stuck in it.
  4. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    Pull the screens off all of the valves and clean the manifold for screen debris.