1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Strobe Install - access to cab??

Discussion in 'Strobe Lighting' started by dhymel1, Jul 24, 2010.

  1. dhymel1

    dhymel1 Junior Member
    Messages: 2

    Does anyone know where to access the cab in an 06 Dodge Ram 2500 Quad Cab? I want to install my box under the rear seat, drivers side. Are there plugs in this area, and if so, where are they and do you need to remove the back seat to get to them? HELP PLEASE. I dont want to drill a hole if I dont have to!!

  2. ajslands

    ajslands 2000 Club Member
    Messages: 2,033

    Go through the fire wall, or drill through the floor. I did both!
  3. tjctransport

    tjctransport PlowSite.com Addict
    Messages: 1,390

    you. no plugs, you need to drill a hole in the floor.
  4. plowguy43

    plowguy43 PlowSite Fanatic
    Messages: 5,281

    Yup, thats where mine is. Below the driver seat, drilled straight down, ton's of clear epoxy or caulking to seal it up (previous owner installed).
    There is a gromment by the steering shaft that you can fish your positive/negative wires through on the firewall, just make sure they don't interfere with anything and aren't in contact with metal.