1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Strait 6

Discussion in 'Chevy Trucks' started by jrm123180, Nov 16, 2004.

  1. jrm123180

    jrm123180 Senior Member
    Messages: 156

    Does anyone know if I would have to convert anything to put in a strait 6 in my 79 Chevy pickup K10 currently w/ a 350. Will the motor mounts line up, as well as bolting to my tranny - th350?


    POWERBAND Member
    Messages: 70

    Safe Six

    Now that's an idea I can get inline with. I don't have your answer but I might know who will:



    I'm mostly into sixes of a different kind but I bought my first new truck last year and although it is a bent six (4.3) I wish I had an inline.

    Powerband :cool: :

  3. derekbroerse

    derekbroerse 2000 Club Member
    Messages: 2,377

  4. wfd44

    wfd44 Senior Member
    from Maine
    Messages: 369

    You would need mounts and accessory brackets for the six.
  5. Tarkus

    Tarkus PlowSite.com Addict
    Messages: 1,113

    It is a bolt in, you may have to repostion transmission fore and aft a bit (depends on truck but not likley a problem on a 4x4). The majorstuff like bellhousing and such will line up okay and if you get a complete engine at a bone yard from a donor car or truck you problem with accessory mounts will be minimal. Look for a pre 70 straight six if you can, those were the best of them. I still like them old sixes.