1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

straight 8 to a v-plow

Discussion in 'Fisher Engineering Discussion' started by EaTmYtAiLpIpEs, Dec 21, 2008.

  1. EaTmYtAiLpIpEs

    EaTmYtAiLpIpEs 2000 Club Member
    Messages: 2,607

    I am looking into buying a used v-plow. it is 3 plug just like my straight 8. Is it true that the only wire you have to change in the control wire? I will not have to change my iso module?
  2. Crash935

    Crash935 2000 Club Member
    Messages: 2,377

    Just the control wire and the controller.

    Once your wired for a V you can also run a straight by putting a adaptor between the controller plug in the cab and the straight blade controller.