1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Square controller goes red

Discussion in 'Meyer / Diamond Products Discussion' started by iceyman, Nov 19, 2015.

  1. iceyman

    iceyman 2000 Club Member
    Messages: 2,925

    Put a new wiring harness in and now controller goes red immediately when touched. Obviously something is wrong but could swear i hooked everything up same way. Any where to start? Meyer c 7.5 .. Plow Lights work
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 4,676

    What pump? Go over grounds. Red normally points to bad coil or short. Could also be with wiring to solenoid.
  3. tjctransport

    tjctransport PlowSite.com Addict
    Messages: 1,390

    every time mine did that it was a bad ground connection at the pump.
  4. iceyman

    iceyman 2000 Club Member
    Messages: 2,925

    Had to be connection some where.. Took all connections and die greased em and put em all back and im good to go. Thanks guys