1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice


Discussion in 'Fisher Engineering Discussion' started by chcav1218, Jan 18, 2009.

  1. chcav1218

    chcav1218 Senior Member
    Messages: 954

    I had sparks coming from the ground (-) post on my MM I motor. The connection was tight and it only happened a few times, but what could it have been?
  2. mc1

    mc1 Senior Member
    Messages: 171

    sparks are sparks thats what they and thats what they do Seriously i would look very close at your + power wire coming to and from sloenoid and then the cable that itself hooks to the pump itself if it only happened for a little bit try to rember did you hit a bump or pushing into s pile then look at the plow and look for contact points and arcs hope this helps electrical sucks