1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

sp 7550

Discussion in 'SnowEx Products' started by mike1316, Nov 6, 2010.

  1. mike1316

    mike1316 Senior Member
    Messages: 155

    I just got one and would like to know what u all think about it pro cons and anything. I should do
  2. Wayne Volz

    Wayne Volz Senior Member
    Messages: 694


    I have two of them and they are great. You will really like the material flow control you have over a traditional v-box spreader.

    Enjoy your new spreader and be ready to make some money.
  3. mike1316

    mike1316 Senior Member
    Messages: 155

    Wow must not be alot of these out here.
  4. ponyboy

    ponyboy PlowSite.com Addict
    Messages: 1,108

    great machines
    turn on machine one switch at a time and turn up speed on knob at a time if you just turn on and off and the aguar and spinner come on it is a big draw i have burnt out boxes in the past so now i have rigged them with toggel switches and have been ok

    DAFFMOBILEWASH PlowSite.com Addict
    Messages: 1,602

    Only use the vibrator when needed. If you run it all the time it will actually compact the salt inside of the hopper. Love my 8500 !!!!
  6. mike1316

    mike1316 Senior Member
    Messages: 155

    That is good to know thanks
  7. HKusp

    HKusp Member
    Messages: 33

    Can someone tell me what the proper strapping procedure is for using the ratchet straps? I have looked in the manual that came with mine (it's actually a Meyer SP 750 which is the same exact unit as the Snowex except it doesn't come with the safety light for the back and is orange instead of yellow. Even the warranty card in the back and some of the pages of the owners manual say Snowex) and it states:
    I have looked all through the manual and even looked at the on-line version from Snowex and it is exactly the same, but nowhere that I can find do they outline the actual strapping techniques other than one tiny diagram on page 8-23 of the manual. Is that the only information available on the subject?
  8. EdNewman

    EdNewman Senior Member
    Messages: 254

    Ran great until I backed it into the bottom of a loading dock. Spent this afternooon fixing it. Working fine again. Straps should be crossed and hooked into the hold below the holes for the cover.