1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice


Discussion in 'Commercial Snow Removal' started by sk8boss, Feb 18, 2003.

  1. sk8boss

    sk8boss Junior Member
    from PA
    Messages: 14

    I need tech help...My plow will not stay up all the time. It slowly creeps down. I replaced the down solenoid, and the up one to..no luck, got another new solenoid thinking the last new one might have been bad....still no luck....any ideas....
    Meyer E-60
    I also checked the fluid its fine....
    Last edited: Feb 18, 2003
  2. baddboygeorge

    baddboygeorge Senior Member
    Messages: 237

    hey buddy change the packing cup fluid is goin around the cup an cylinder is creeping down .an when ya got it apart if ya have time clean the filters an throw a seal kit in it . any more questions feel free
  3. Highpoint

    Highpoint Senior Member
    Messages: 241

    No No No, you need to replace the O ring at the base of the lift cylinder inside the housing. Should be approx. 2.5 inches in Dia.
    AND maybe the packing cup.:D