1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SnowEx D6230 Controller Repair

Discussion in 'SnowEx Products' started by SnowGuy, Dec 25, 2010.

  1. SnowGuy

    SnowGuy Senior Member
    from NW Ohio
    Messages: 201

    Does anybody either repair these or know someone that does? I have 4 or 5 of these that I would like to get repaired. We have used these for years and do to the problems with these controllers, we are slowly switching to Salt Dogg spreaders and would like to get these fixed as spares for the SnowEx spreaders that we do have left. THANKS for any and all help.
  2. clark lawn

    clark lawn PlowSite.com Addict
    from NE ohio
    Messages: 1,233

    as far as i know they are not repairable. do a search for karrier company. he makes really good controllers for snowex
  3. Camden

    Camden PlowSite Fanatic
    Messages: 6,605

    I would like to find someone who fixes them as well.
  4. doo-man

    doo-man Senior Member
    Messages: 387

    I just repaired my salt dogg controller. If you guys want to pm me I can give yours a try I am sure they are very similar design inside.
  5. ctbman

    ctbman Member
    Messages: 76

    Sno ex /Trynex controller

    I also have a trynex controller that is not working.all its needs is the touch pad.The wires going to the board wore through.It has a plug on it and trynex says it is not a servicable part.How is that for a scam?They will sell you the controller and when it fails they will just sell you another 450.00 controller insted of fixing it.I have three,well two now and when the others burn up and they will I will be buying karriers.
  6. darwood

    darwood Junior Member
    Messages: 1

    My sister uses this controller (SnowEx D6230). Two units failed.

    I'm not in the industry myself, I'm an electronics engineer. And hence I've ended up repairing a few of these already for her and her businss contacts. Should anyone require a repair service feel free to let me know.

    Just in case any of you need that service.