1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

SnowEx 1075 motor replacement help

Discussion in 'Truck & Equipment Repair' started by jlord85, Dec 12, 2011.

  1. jlord85

    jlord85 Junior Member
    from Chicago
    Messages: 9

    I am trying to replace the electric motor on my Snowex 1075. Any pointers on how to get the 2 screws out that hold the motor to the transmission?
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,392

    yes,,you can either take the whole thing out as an assy, or a 5/16 8mm on a swivel and about a 4" ext and a shorter handle 1/4. i havent done a 1075 is a while,,,but i thought that you cant just take the motor out. has to come out as an assy. with the trans
  3. maelawncare

    maelawncare Senior Member
    Messages: 871

    I assume you have already taken the power unit out of the housing.

    If you have then get some bolt remover sockets. Real easy from there.

    It is pretty dam hard if you dont take it out. If you cant get the auger off then you have a much bigger problem on your hand.