1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Snoway power connector.

Discussion in 'Sno-Way Discussion' started by GregK, Dec 22, 2007.

  1. GregK

    GregK Junior Member
    from Chicago
    Messages: 8

    Where can I get another power connector? I want to use the output on the truck to power a large inverter on occasion so I just need a plug.

    I assume it's not proprietary, but perhaps I need to get one from Snoway.
  2. festerw

    festerw Senior Member
    Messages: 986

    I think Jerre told me the connector and pins were separate and neither were cheap. You could just get some more cable and an Anderson connector and run it to the battery.
  3. I think I may have a problem similar to yours, the power plug seems to either lose power or somethin cause my guy was tellin me that sometimes he will push the button on the controler and it is transmitting but it would hesitate or he would have to get out and move the power plug some to get better connection.
    The power plug has some old di-electric greese in it and so IDK if that has anything to do with it that it got so old and dirty that now their's no connectivity there cause of the dirt?
    So i was thinking of using some cleaner in the plugs to get a clean connection.
    Any thoughts would help thanks