Snow Plowing Forum banner

Sno-Way ST-90 wireless issues

1K views 1 reply 2 participants last post by  basher 
#1 ·
I posted this in the Owner's group but haven't gotten any feedback yet. It's ready to snow again and I need help. Here it is:

My ST-90 with wireless remote is starting to act up. I've replaced the batteries in the remote after only several uses, which doesn't seem to help. I press any of the buttons (up, left or right) and there is often no reaction at the plow. I may have to push a button several times (up to 5 to 10) before the plow reacts to that command. Even when the plow starts to rise, it may only go up several inches, then stop. I have to repeat the process over and over. It's very frustrating when you expect the plow to lift when stacking snow and it just sits there. This also happens when angling left or right. The fluid level is OK. I've cleaned the electrical terminals on the relays and also the at the battery. Any thoughts???

Thanks, Fran
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top