1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

slow operating plow

Discussion in 'Blizzard Plows Discussion' started by sven1277, Feb 8, 2013.

  1. sven1277

    sven1277 Senior Member
    Messages: 498

    What could cause my ph1 8611lp to function excruciatingly slow. Drop is fine. It is full of fluid. Thanks
  2. sven1277

    sven1277 Senior Member
    Messages: 498

    Could it be the pick up tube in the tank? Its been a long time since it fell out.
  3. sven1277

    sven1277 Senior Member
    Messages: 498

    Just checked It out. I think the l shaped pickup is loose in the resevoir
  4. Jerre Heyer

    Jerre Heyer Senior Member
    Messages: 948

    If it's the white thread in type just screw it in till it's tight and pointing down and back. If it's the blue tube type then you can trim the tube short on the pump end and put a small STAINLESS hose clamp on the black elbow and FORCE the elbow on the blue tube over the steel input port and tighten up the hose clamp. That will keep it from spinning.