1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Scrape maxx down force kit

Discussion in 'SnowEx Products' started by Bigk40k, Sep 24, 2016.

  1. Bigk40k

    Bigk40k Junior Member
    Messages: 8

    the video for it says that your dealer can install it in a few minutes, so is it something I can just install myself? It must be a fairly simple thing if it's that quick, any dealers on here know anything?
     
  2. RCSLINC

    RCSLINC Junior Member
    Messages: 27

    It
    is 13 minutes with programming the controller
     
  3. JMHConstruction

    JMHConstruction PlowSite.com Addict
    Messages: 1,722

    I was looking at a snowex at the beginning of the season. I don't know if it's the same everywhere, but my dealer sells them for $100 with free instalation. Not sure how much the other places charge, but I can't imagine it being much.
     
  4. bliz&hinikerDLR

    bliz&hinikerDLR Senior Member
    Messages: 553

    Yes, you can easily install it yourself. However, the install instructions do not tell you how to solve problems that can occur. The most common is having too low of a pressure relief setting. This causes a bouncing or cycling of the motor. To eliminate the problem, you turn in the adjustable pressure relief in about 1/8 of a turn. Dealers may use a pressure gauge when setting the relief but you should be able to get it working properly with this method.