1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

ScoopDogg and CAT 906

Discussion in 'SnowDogg Snow Plows' started by gottaloveOT, Mar 4, 2010.

  1. gottaloveOT

    gottaloveOT Senior Member
    Messages: 116

    We got a new CAT 906 loader with a 10' ScoopDogg pusher from Michigan CAT, they are a dealer for ScoopDogg. This loader uses a universal skid steer coupler so we got the box for a skid steer.

    The problem I am having is the mount on the box is too low for the loader so when the loader is in float, there is no downward travel of the box. This makes it hard to clear over wavy pavement and if I don't use float, it just barely sits flush and level on the ground. Once the shoes wear, all it will ride on is the rubber and that will wear it out quickly. We have only used the box like 4 times since new and I have already had to adjust the rubber and I might need to do it again.

    Any ideas?

    I may have to find a new pusher that has the coupler set higher on the box.