1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

S.A.M. universal controller issue

Discussion in 'SnowDogg Snow Plows' started by deereequipment, Nov 28, 2009.

  1. deereequipment

    deereequipment Member
    Messages: 90

    I just purchased the controller, yellow face, # 1306901 to replace the touch pad for my Meyer.

    It came with a Harness, to adapt over the Meyer.

    It is no where close to what I have.

    What I have is smaller pins, lined up in a circular pattern.
    The addapter is larger pins, in a rectangular patern.

    of course there is NO paperwork or manual supplied.

    Anyone tell me if I have the wrong adapter?
  2. smoorman

    smoorman Sponsor
    Messages: 447

    This is for the most recent/common Meyer harness connector. Take the controller to a Meyer dealer and they should be able to fix you up with an adapter.

    There should have been instructions in the box - I'll check with our assembly group.

    Mods - feel free to move this to the SnowDogg forum if you like...
  3. 33yearsinsnow

    33yearsinsnow Senior Member
    from ohio
    Messages: 111

    The Meyer harness you ahve is pretty old. Meyer does make an adaptor to go from the black round connector to the square white connector so the adaptor for the universal controller will work. I believe the adapter is aroung $20 or you can replace the complete harness to the new style 6 pin square plug for around $70
  4. mcdevi90

    mcdevi90 Junior Member
    from nj
    Messages: 15

    yea hope that works