1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Rt3 V angle problem

Discussion in 'Boss Plows Discussion' started by DSLL, Dec 2, 2007.

  1. DSLL

    DSLL Senior Member
    Messages: 136

    While out plowing today the plow tripped and now the left wing wont move, stuck in pulled back position. I can grab on to it and move it back and forth but it doesn’t move when activated. The right wing works fine and I noticed that I can't move it like I can the left wing by grabbing on to it. What’s going on? the plow is rt3 sh1 does not have smart locks. Thanks
  2. DSLL

    DSLL Senior Member
    Messages: 136

    solved it. At first glance i thought all the wires were connected on the plow. Turns out the blue wire was off. Replaced the wire connector and put it back on, works like a charm
  3. Little Jon

    Little Jon Senior Member
    from Buffalo
    Messages: 139

    Last year I did the same thing, only it was a blown hydro line that didnt leak, so couldnt tell until they opened it up.