Snow Plowing Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
78 Posts
Discussion Starter · #1 ·
I have a 9' diamond edge Meyer plow. When plow is attached and plugged in the right directional on plow frame will not go out even with truck off and keys removed. When truck is running the right side running light looks brighter than the left. All connections have been cleaned and look good.
Any Thoughts?
 

· Registered
Joined
·
78 Posts
Discussion Starter · #3 ·
Im not quite sure I know the difference. It is a one plug system
 

· Registered
Joined
·
8,557 Posts
If one plug it is most likely a module system. There should be two small boxes under the hood that have 3 plugs. Most likely your issue is in the one on the passenger side of the truck.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top